Please provide a sketch or engineers drawing of the oxidation ditch, make sure it includes flow direction, prevailing wind direction and a North directional arrow. Email the sketch to matt@houseindustriesinc.com or FAX to (870) 588-4669. 

Also choose a ditch shape and fill in the dimensional data:

Rectangular Ditch
          Height:      Width:     Freeboard:

Cross Section K-1	Provide for all Ditches: A:      B: C:      D: E:       F: G:      H:  J:      L: R:     W: X:      Y:
Cross Section K-2
Cross Section K-3

---

Section 2:  System Wastewater Data

Wastewater Source:          Municipal

                                         Industrial - Type:

                                         Other  -  Source:

Wastewater Characteristics:

	Influent (mg/l)	Effluent (mg/l)	Monthly Avg. (mg/l)
BOD5:
TSS:
TKN:

System Flow Data:
                                Design Flow:      

                                Peak Flow:        

                                Average Flow    

---

Section 3: Operational Data

Provide the following Data if available:

Water Temp:     Summer:           Winter:

Salinity:         TDS:         Elevation:

Alpha (α):           Beta (β):

State Regulatory Mixing Requirements (HP/Mgal):

     Complete Mix:           Partial Mix:

---

Section 4: Electrical Data

Provide the following electrical data:

Voltage:    

Phase:       

Hertz:        

Maximum Available Current (Amps): 

---

Section 5: Other Information

Other Information, Instructions or Comments:


Please fill out form completely and Submit.  We will get back to you as soon as possible.